5 Common Mistakes to Avoid When Installing Underfloor Heating Beneath Concrete Floors in Lincolnshire

Thinking about adding underfloor heating under your concrete floors Lincolnshire? Great choice! It’s a smart, modern, and cosy way to keep your home warm but only if it’s done right.

We’ve seen many homeowners excited to get started. But small mistakes can lead to big problems later. Let’s save you from the trouble. Here are five common mistakes to avoid when installing underfloor heating under concrete floors.

 

  1. Skipping the Insulation Layer

This is one of the biggest mistakes. Skipping the insulation layer means most of your heat will go down instead of up into your room.

That means higher energy bills and cold feet.

What to do: Always add a proper insulation layer under the heating pipes. It keeps the heat where you want it—inside your home.

 

  1. Incorrect Pipe Spacing or Layout

The way the heating pipes are laid out really matters. If the pipes are too far apart, the floor will have cold patches. Not good.

What to do: Make sure the pipe spacing is even and planned properly. At Flowing Floors Ltd, they always create a layout that gives smooth, even heating.

 

  1. Pouring Concrete Too Soon

Don’t rush this part. Before the concrete goes down, you must test the heating system. If there’s a leak and you’ve already poured the concrete, it’s a nightmare.

What to do: Always pressure-test the heating pipes before pouring. It’s a step Flowing Floors Ltd never skips.

 

  1. Using the Wrong Screed or Concrete

Not all concrete is the same. Some types crack easily or don’t transfer heat well. Using the wrong mix can cause trouble.

What to do: Use a special screed or concrete mix made for underfloor heating. Flowing Floors Ltd use flowing screeds that work perfectly with their systems across Lincolnshire.

 

  1. Turning the Heating On Too Early

Your new floor looks great. You’re excited. We get it! But turning on the heat too soon can damage the floor.

What to do: Wait for the floor to fully dry and cure. This usually takes 7 to 28 days. After that, turn on the heating slowly. Don’t rush it.

 

Final Thoughts

Underfloor heating with concrete floors is a great combo. It’s stylish, warm, and long-lasting.

Flowing Floors Ltd they help homeowners across Lincolnshire get it done the right way—no stress, no mess, and no mistakes.

Thinking of upgrading your floors? They’re here to help. Contact them today to discuss your project.

Leave a Reply